LRP Conversion Cable 500903 - Presentation:
- When connecting such a motor to the Flow
- The ESC does not respond to throttle input at all.
- Blue LED locks (solid ON).
- Pressing the SET or MODE button is confirmed with the green LED, but you cannot enter transmitter setup or mode programming.
- No motor control.
- To solve this problem, the level converter reduces the sensor signals from the problematic motors to a level that the Flow X can handle properly.
- We suggest doing the following:
- 1. Use the desired motor with the Flow X with a standard Hall sensor cable. If the motor is working properly, continue to use the standard Hall sensor wire.
- 2. Only if the desired motor does not work properly with the Flow X with a standard Hall sensor wire, use this optional cable.
