SkyRC Lipo E3 Charger Features
Main Features
- 100-240V power supply
- For 2S or 3S Lipo batteries
- Maximum load 1.2A
- Power 11W
- Direct charging via balance socket
- Dimensions 88x57x35mm
- Weight 103 gr
Included
- Charger
- AC power cord
- Manual
SkyRC Lipo E3 Charger Instruction Manual
The e3 SKYRC comes with a built-in power supply. You can plug the AC power cord directly into the AC 100-240 V outlet. Please follow the following steps to charge the battery:
- 1) Plug the AC power cord into the charger.
- 2) Plug the power cord into an AC outlet (100-240V). All LEDs light green and flash red to indicate that the charger is ready.
- 3) Plug the battery balancing plug into the socket on the front of the charger. After 2 seconds, the charger detects the battery voltage and charging begins.
- 4) The charger starts charging. The LEDs are lit solid red. If it is a two-cell battery, the 1S and 2S LEDs light up solid red. If it is a three-cell battery, the 1S, 2S and 3S LEDs light up solid red.
- 5) When an element is fully charged, the corresponding LED lights solid green. A 2-element pack is fully charged when the 1S and 2S LEDs are solid green. A 3-element Pack is fully charged when the 1S, 2S and 3S LEDs are solid green.
- 6) Unplug the battery from the charger, the LEDs remain green and flash red, which indicates that the charger is ready to charge another battery.
