🚙 Konect Fusion G2 Combo Brushless 3660 1800 KV IP67 Special Crawler
The combo Konect Fusion G2 KN-3660-FUS1800-G2 is a Brushless 1800 KV sensored motor specifically developed for 1/10 Crawler models. Combining a 3660 motor with a perfectly matched ESC, this combo offers exceptionally precise power and torque control for accurate handling on technical terrain. Its IP67-rated waterproof electronics, compatibility with 2S to 3S LiPo batteries, and BEC adjustable from 6 to 8.4 V make it a complete and versatile solution for upgrading or replacing the powertrain of your crawler.
🧗 A drive system designed for the Crawler
Unlike a Brushless powertrain designed for speed, the Fusion G2 1800 KV prioritizes torque, smooth power delivery, and control at low speeds. Its sensored motor allows for precise speed control, which is particularly valuable during technical maneuvers and sections requiring very subtle throttle control.
⚡ An Brushless 3660 1800 KV motor
The 3660-format motor delivers 1800 KV, a rating particularly well-suited for use Crawler in 2S or 3S setups. This configuration provides a significant torque reserve while maintaining controlled speed, making it ideal for slow maneuvers and obstacle navigation. The motor has a 3.175 mm shaft and measures Ø36 x 56 mm.
💧 IP67-rated waterproof electronics
The combo Fusion G2 features IP67 protection, allowing it to be used in wet conditions and on terrain where water splashes and mud are common. This makes it a particularly well-suited solution for Scale and Crawler outdoor use.
🔋 Compatible with 2S to 3S LiPo batteries
The system supports 2- to 3-cell LiPo batteries as well as 4- to 9-cell NiMH packs. This versatility allows you to easily adapt the power supply to your model’s needs and the desired performance level.
🔌 An adjustable BEC for servos
The ESC features an adjustable switching BEC offering three voltages: 6.0 V, 7.4 V, or 8.4 V. It delivers 4 A continuously and up to 8 A peak, allowing it to efficiently power the servos and electronic accessories of the crawler.
🛠️ Programming via LED board
The ESC can be configured using a compatible LED programming board, allowing its operation to be tailored to the driver’s preferences and the vehicle’s configuration.
⚙️ Technical Specifications
- Brand: Konect
- Part Number: KN-3660-FUS1800-G2
- Type: Combo Brushless Special Sensored Crawler
- Scale: 1/10
- Direct current: 40 A
- Motor: Brushless sensored
- Motor size: 3660
- KV: 1800 KV
- Motor dimensions: Ø36 x 56 mm
- Shaft diameter: 3.175 mm
- Weight: 177.8 g
- Battery: 2S to 3S LiPo / 4- to 9-cell NiMH
- BEC: 6.0 / 7.4 / 8.4 V
- Current BEC: 4 A continuous / 8 A max
- Programming: Compatible LED board
- Water resistance: IP67
- Compatible vehicles: Crawler 1/10
🧩 Kit contents
- 1x Brushless 3660 1800 KV sensored motor
- 1x ESC Brushless Fusion G2
- Wiring required for the combo to operate
❗ Required
- A 2S or 3S LiPo battery or a 4- to 9-cell NiMH pack
- A 2-channel radio system (minimum) with a receiver
- A steering servo compatible with your crawler
- An LED programming board if you want to change the ESC settings
- A Gear motor compatible with your drivetrain
🎯 Who is this for?
The Konect Fusion G2 1800 KV is designed for modelers looking for a Brushless progressive, high-torque motor for Crawler 1/10 scale models. Its sensored motor, adjustable BEC, and IP67 rating make it an excellent choice for off-road enthusiasts, Scale and off-road touring, especially when high precision at low speeds is prioritized over top speed.
- Écran: Sans écran
- Nombre de voies: 3 voies
- Récepteur: Avec récepteur
- Télémétrie: Non compatible télémétrie
- Type de radio: Volant
