MXLR 3D Rear Body Reinforcements A800R/RR MAX-09-026

🏁 Improve the aerodynamic stability and lifespan of your body with the MXLR rear mount for the Awesomatix A800R/RR! Specially designed for Touring race cars, this mount limits deformation of lightweight body panels at high speeds and reduces the risk of cracks around the wheel wells. By maintaining the body’s shape, it helps preserve downforce and performance on the On-road. Manufactured via 3D printing from an impact-resistant material, it features a design engineered to minimize its impact on chassis flex.

⚙️ Technical Specifications

• Type: Rear body support
• Compatibility: Awesomatix A800R / A800RR
• Manufacturing: 3D printing
• Impact-resistant and durable material
• Minimizes body deformation at high speeds
• Reduces the risk of cracks around the wheel wells
• Helps maintain the body’s original shape
• Helps maintain downforce
• Improves the longevity of lightweight car bodies
• Optimized design to minimize the impact on chassis flexibility
• Mounting adapted to various Toplink configurations
• 3 possible mounting positions depending on the brackets used
• Support point height adjustable via an upper screw

🔧 Mounting Positions

The MXLR rear mount can be installed in three different locations, depending on the Toplink configuration of your Awesomatix A800R/RR:

• Position 1: on the rear top deck, with mounting possible in either direction.
• Position 2: in front of the AM19 Toplink mounts, with the mount facing backward.
• Position 3: behind the AM19 Toplink mounts, with the mount facing forward.

Compatibility with Toplink mounts:

• Original AM19-R: All three mounting positions are possible.
• Optional AM19-TLT: Mounting in the rear position, with the mount facing forward.
• Long Toplinks mounted on the suspension arms: the front AM19 mounts can be used.

This design allows the mount’s positioning to be adapted to different suspension configurations and chassis flex.

🛠️ Installation Tips

• Select the mounting position that matches the top link configuration.
• Install the rear body mount.
• Adjust the height of the upper mounting point so that it contacts the body’s trunk without any additional play when the body rests on its rear mounts.
• Verify that the installation does not interfere with suspension operation or chassis flexibility.

❗ Important: Mounting screws are not included. MXLR recommends using 7 mm aluminum screws Awesomatix, part number SB3X7AL.

💡 Note: This part is 3D-printed. As a result, slight lines or streaks caused by the print layers may be visible. This is a normal characteristic of this manufacturing process.

🧩 Contents

• 1 MXLR rear body mount for Awesomatix A800R/RR

❗ Please note

• Mounting screws not included
• Awesomatix SB3X7AL aluminum screws (7 mm) recommended
• Upper height adjustment screw not included

🔄 Compatibility

• Awesomatix A800R
• Awesomatix A800RR