To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a readyset version with radio. The AWD chassis is equipped with VCS (variable camber) on the front axle, which optimizes camber with the suspension springs. The chassis design leaves room to install the optional MZW431 gyroscope. This gyro is adjustable via a potentiometer on the chassis to increase or decrease steering correction depending on the angle of the chassis, allowing both beginners and experts to drive to their full potential.
Mounted entirely on bearings, the ultra-efficient AWD chassis is complemented by a body and the Syncro KT531P 2.4 GHz radio, all at a very affordable price. All you need to do is insert the batteries to enjoy the thrills of drift with the included set of specific tires. The chassis is compatible with almost all autoscale Mini-Z (some additional parts may be required depending on the body).
This model includes the latest KT531P* transmitter with steering compensation, throttle compensation, two-speed steering angle adjustment, and control of the flashing speed of optional LEDs, as well as a handle with a comfortable grip for an even more precise feel of control. In addition, this radio includes a special beginner mode that allows you to limit the speed of the vehicle. In short, the Mini-Z 4WD promises you a unique world of racing action for your enjoyment!
- Mini-Z AWD Readyset, on AWD chassis
- New electronic board with optimized steering management
- Chassis designed to accommodate the optional gyroscope
- readyset set requiring only batteries to run
- 2.4 GHz Syncro KT-531P radio
- Painted and decorated body, "showcase" quality
- Spec VCS (variable camber suspension), camber adjustment with suspension springs
- Front suspension springs easily changed without tools
- Wide range of options available
- Compatible with Gyro, MZW431 (optional)
- Length 169.0mm
- Width 73mm
- Height 49mm
- Wheelbase 90(L)mm
- Front/Rear Track: 61.5 mm／59 mm
- Chassis MA-020-N
- Front wheel offset +2.5mm
- Rear rim offset +0.0mm
- Weight 193g (approx.)
- Class 130 motor
- R/C Syncro KT-531P
- MA-020 chassis fully assembled and factory assembled
- Body: ToyotaCelica Turbo 4WD No.7 WRC 1993 painted and decorated
- Radio Syncro KT-531P
- Gear motor: 15, 17, 19, 21T
- Spur gear: 27, 29, 31T
- Wheel wrench
- Gear removal tool
- Ni-MH AAA (R3) batteries X 4
- AAA (R3) batteries X 4 for the radio
- Charger if using Nimh AAA batteries
