🏁 The combo Brushless Konect RS8 Elite + K8 Elite G3 4268 is a high-performance powertrain set designed for drivers of 1/8-scale competition RC cars, both off-road and on On-road. It combines the ESC Konect RS8 Elite, featuring numerous advanced settings, with the Brushless Sensored K8 Elite G3 motor, developed and designed in France. Compatible with 2S to 6S LiPo batteries, this combo offers a complete solution for those seeking power, precision, and consistency. Available in 1900KV and 2200KV versions, it allows you to tailor the motor setup to the requirements of each category.
General Specifications of the combo
- Series: Elite
- Type: Combo Brushless with sensor (Sensored)
- Scale: 1/8
- Use: Off-road racing and On-road
- Motor: Brushless
- Batteries: 2S to 6S LiPo depending on configuration
- Available versions: 1900KV and 2200KV
Motor Brushless Konect K8 Elite G3
- Model: K8 Elite G3
- Format: 4268
- Versions: 1900KV or 2200KV
- Diameter: 41.90 mm
- Length: 70 mm
- Shaft diameter: 5 mm
- Weight: 335 g
- Housing: Fully enclosed CNC-machined aluminum
- Finish: Black anodized aluminum
- Cooling: Heat sink fins Nitro integrated into the housing
- Windings: Ultra-pure copper for optimized efficiency
- Stator: 0.2 mm laminations for rapid acceleration response
- Rotor: One-piece design for improved mechanical strength
- Bearings: High-speed ABEC 5
- Connectivity: Dual Sensor connector
- Mounting: Compatible with M3 and M4 screws
- Design: Developed and designed in France
ESC Brushless Konect RS8 Elite
- Model: RS8 Elite
- Type: ESC electronic Brushless for 1/8 competition
- Adjustable settings: 33
- Built-in modes: 3
- Super Boost function: Up to 48° advance
- Turbo function: Turbo timing adjustment
- BEC: 8A continuous, 12A peak
- Voltage BEC: Adjustable to 6V or 7.4V
- Protections: Low voltage, overheating, and reverse polarity
- Data logging: Temperature and maximum speed after use
- Data retrieval: Via a compatible programming unit
- Remote shutdown: Built-in function
- Cooling: High-speed aluminum fan
- Fan dimensions: 30 × 30 mm
Konect K8 Elite G3 1900KV – Part No. KN-K08G32509
- Motor designed for smooth operation and long run time.
- Recommended use: Buggy 1/8 electric.
- Suitable for pilots looking for a progressive and controllable motor response.
Konect K8 Elite G3 2200KV – Part No. KN-K08G32502
- Motor designed for top speed and power.
- Recommended use: Truggy 1/8 and On-road 1/8 electric.
- Suitable for drivers looking for a more dynamic powerplant.
The part numbers listed correspond to the motors for both versions. Performance also depends on the gear ratio, battery, and ESC settings.
- 1 ESC Brushless Konect RS8 Elite
- 1 motor Brushless Konect K8 Elite G3 4268, available in 1900KV or 2200KV versions depending on the selected model
The combo Konect RS8 Elite + K8 Elite G3 is designed for drivers of buggies, truggies, and 1/8-scale On-road electric cars looking for a high-performance, customizable motor setup for competition.
Thanks to the 33 adjustable parameters of the ESC RS8 Elite, the Boost and Turbo functions, and the motor’s high-precision design, this package allows you to tailor the car’s performance to On-road conditions and your driving style.
The 1900KV motor is particularly well-suited for buggy drivers who prioritize consistency and run time, while the 2200KV will better meet the needs of truggy or On-road drivers seeking speed and power.
- Buggy 1/8 electric: 1900KV motor recommended
- Truggy 1/8 electric: 2200KV motor recommended
- On-road 1/8 electric car: 2200KV motor recommended
- 2S to 6S LiPo batteries, depending on the configuration
- Motor mounts compatible with the 4268 format
- M3 or M4 motor mounts
- Gear teeth for 5 mm motor shaft
Caution: Before installation, check the available dimensions on your chassis, the gear ratio, battery compatibility, and the specific usage recommendations for your vehicle.
