Hobbywing ESC QuicRun WP16BL30 G2 30A 2-3S 30110001

⚡ The Hobbywing QuicRun WP 16BL30 G2 is a ESC electronic Brushless sensorless ESC designed for 1/16- and 1/18-scale radio-controlled cars. As the successor to the HW30110000 model, this new generation features a more compact design, making it easier to install in small chassis. Compatible with 2S to 3S LiPo batteries, it delivers a continuous current of 30A and up to 100A peak current. Its IP67 waterproof design and Freewheeling technology ensure efficient operation with improved temperature management. It also features an adjustable BEC of 6V or 7.4V at 2A, compatible with suitable HV servos.

⚙️ Technical Specifications

• Type: ESC electronic Brushless (ESC)
• Compatible motors: Brushless Sensorless
• Continuous current: 30A
• Peak current: 100A
• Power supply: 2- to 3S LiPo
• BEC: 6V or 7.4V / 2A
• HV servo compatibility: Yes, with BEC set to 7.4V
• Protection rating: IP67
• Technology: Freewheeling
• Programming: SET button, LED controller, G2 LCD controller, and LCD Pro
• Recommended motors: Hobbywing QuicRun 2030 G2 and 2435 G3
• Compatible scales: 1/16 and 1/18
• Applications: On-road RC cars and off-road vehicles
• Dimensions: 33.4 × 26.8 × 15.1 mm
• Weight: 38.5 g
• Replaces part number: HW30110000

⚡ A compact ESC for 1/16 and 1/18 RC cars

The Hobbywing QuicRun WP 16BL30 G2 was developed to meet the installation constraints of small radio-controlled cars.

More compact than its predecessor, it makes it easier to integrate electronics into chassis with limited space.

• Compact dimensions: 33.4 × 26.8 × 15.1 mm.
• Weighs only 38.5 g.
• 30A continuous current.
• Maximum peak current of 100A.
• Compatible with 2S and 3S LiPo batteries.
• Designed for Brushless sensorless motors.

It is a suitable solution for installing or replacing the original ESC in a compatible 1/16 or 1/18 RC car.

🔌 Adjustable BEC 6V / 7.4V, compatible with HV servos

This second-generation model features an improved BEC capable of providing two output voltages.

• BEC 6V / 2A for equipment compatible with this voltage.
• BEC 7.4V / 2A to power compatible HV servos.

This setting allows you to adjust the power supply to the receiver and steering servo to match the equipment installed on the vehicle.

Important: Before selecting 7.4V, make sure the receiver and servo support this voltage.

💧 IP67 waterproof protection

The Hobbywing WP 16BL30 G2 features IP67 waterproof protection, suitable for the demands of off-road modeling.

This design provides better protection for the electronics against:

• Dust.
• Water splashes.
• Wet conditions encountered while driving.

The IP67 rating applies to the ESC. It does not guarantee the waterproofing of the vehicle’s other components.

🛠️ Programming and Settings

The ESC can be programmed using several compatible accessories.

• SET button.
• LED programming unit.
• G2 LCD programming unit.
• LCD Pro programming unit.

These different options allow you to access the ESC's operating parameters depending on the programming device used.

🧩 Contents

• 1 ESC Hobbywing QuicRun WP 16BL30 G2 Brushless 30A

Any additional accessories are not specified in the information provided.

🔄 Compatibility

The Hobbywing QuicRun WP 16BL30 G2 is designed for small-scale radio-controlled cars equipped with a Brushless sensorless motor.

Check the following before installation: available space in the chassis, motor compatibility, connectors, and the voltage rating of the receiver and servo.

🎯 Who is it for?

The Hobbywing QuicRun WP 16BL30 G2 is designed for 1/16 and 1/18 RC car enthusiasts who want to install a Brushless motor or replace their current ESC.

With its 30A continuous current rating, BEC 6V/7.4V, IP67 protection, and Freewheeling technology, it offers a compact and versatile solution for small On-road radio-controlled or off-road vehicles.