Hobbywing ESC EzRun MAX10 G2S 140A 2-4S HW30102500

⚡ The Hobbywing Ezrun MAX10 G2S 140A is a ESC Brushless high-performance speed controller for 1/10 scale vehicles, compatible with sensored and sensorless motors and 2S to 4S LiPo batteries. This update to the MAX10 G2 integrates the Bluetooth directly into the switch, allowing you to program the ESC, view recorded data, and perform updates via the HW LINK app—without the need for an additional module.

🆕 What’s New in the MAX10 G2S

• Bluetooth module integrated directly into the switch.
• Programming from a smartphone via the HW LINK app.
• Internal data logging for the last 10 minutes.
• Graphical data viewing via the app.
• New 8.4 V BEC setting for High Voltage servos.
• Firmware updates directly from the app.
• No external Bluetooth module required for common settings.

⚙️ Technical Specifications

• Type: ESC Brushless 1/10.
• Compatible with sensored and sensorless motors.
• Continuous current: 140 A.
• Peak current: 880 A.
• Power supply: 2S to 4S LiPo.
• BEC Switch Mode: 5 A continuous.
• Adjustable voltage BEC: 6 V / 7.4 V / 8.4 V.
• Battery connector: XT60.
• Motor outputs: gold-plated Bullet connectors.
• Adjustable turbo timing up to 32°.
• Built-in cooling fan.
• Fan powered by the BEC.
• Frameless fan with side air exhaust.
• Automatic fan activation based on temperature.
• Waterproof sensor interface.
• Water and dust protection: IP67.
• Separate 3-pin programming port.
• Dimensions: 53 x 39.5 x 37.2 mm.
• Weight with cables and connectors: 125 g.

📱 Bluetooth and programming

• Bluetooth built into the switch.
• Programming directly from the HW LINK app.
• Effective Bluetooth range of approximately 5 meters.
• Change settings without an additional programmer.
• View recorded data.
• Firmware updates via the app.
• Compatible with the LCD Program Box Pro.
• Compatible with the OTA Program Module.

📊 Data Logging

The MAX10 G2S features a built-in data logging system capable of recording data from the last 10 minutes of operation. This information can then be viewed graphically in the HW LINK app to analyze vehicle performance and optimize settings.

🚀 Turbo Timing

• Adjustable turbo timing up to 32°.
• May increase maximum RPM by approximately 25% with a compatible Hobbywing motor.
• This feature is optimized specifically for Ezrun 3652/3665 SD G3 motors.

🔋 BEC adjustable to 6 / 7.4 / 8.4 V

• BEC 5 A continuous Switch Mode.
• Set to 6 V for standard servos.
• Set to 7.4 V for compatible High Voltage servos.
• 8.4 V setting for high-voltage (HV) servos performance.
• A 3S LiPo battery or higher is required to use the 7.4 V or 8.4 V BEC outputs.

🔧 Motor Compatibility

• With 2S LiPo: Brushless 3652-format motor up to 6000Kv.
• With 3S LiPo: Brushless 3665-format motor up to 4000Kv.
• With 4S LiPo: Brushless motor, 4268 size, up to 2600 kV.

❄️ Cooling

• Housing with integrated heat sink Nitro.
• Frameless fan.
• Air exhaust through the sides.
• Temperature-controlled fan.
• Automatically activates when the temperature threshold is reached.

🛡️ Electronic protections

• Low-voltage battery protection.
• Overheating protection.
• Protection against loss of radio signal.
• Capacitor overheating protection.
• Waterproof sensor interface.
• IP67 protection against water and dust.

🚗 Applications

• Short Course Truck 1/10.
• Truck 1/10.
• Monster Truck 1/10.

🧩 Contents

• 1 ESC Hobbywing Ezrun MAX10 G2S 140A.

🔧 Optional Accessories

• Hobbywing LCD Program Box Pro – Part No. HW30502002.
• Hobbywing OTA Bluetooth Program Module – Part No. HW30850400.

ℹ️ Important Information

• A 3S LiPo battery or higher is required to achieve a voltage BEC of 7.4 V or 8.4 V.
• Turbo Timing and motor protection Nitro require a compatible motor Hobbywing, such as the Ezrun 3652/3665 SD G3.
• The range Bluetooth is intentionally limited to approximately 5 meters.