Hobbywing ESC EzRun MAX10 G2S 140A 2-3S HW30102700

⚡ The Hobbywing Ezrun MAX10 G2S 80A is a ESC Brushless for 1/10 scale vehicles, compatible with both sensored and sensorless motors. This new generation builds on the performance of the MAX10 G2 while integrating the Bluetooth directly into the switch, allowing you to program the ESC, view stored data, and perform updates via the HW LINK app, without the need for an additional module.

🆕 What’s New in the MAX10 G2S

• Bluetooth module integrated directly into the switch.
• Programming from a smartphone via the HW LINK app.
• Internal data logging for the last 10 minutes.
• Graphical data viewing via the app.
• New BEC 8.4 V setting for High Voltage servos.
• Firmware updates directly from the app.
• No external Bluetooth module required for standard settings.

⚙️ Technical Specifications

• Type: ESC Brushless 1/10.
• Compatible with sensored and sensorless motors.
• Continuous current: 80 A.
• Peak current: 520 A.
• Power supply: 2S to 3S LiPo.
• BEC Switch Mode: 5 A continuous.
• Adjustable voltage BEC: 6 V / 7.4 V / 8.4 V.
• Battery connector: XT60.
• Motor outputs: gold-plated Bullet connectors.
• Adjustable turbo timing up to 20°.
• Built-in cooling fan.
• Fan powered by the BEC.
• Frameless fan with side air exhaust.
• Automatic fan activation based on temperature.
• Waterproof sensor interface.
• Water and dust protection: IP67.
• Separate 3-pin programming port.
• Dimensions: 53 x 39.5 x 37.2 mm.
• Weight with cables and connectors: 125 g.

📱 Bluetooth and programming

• Bluetooth built into the switch.
• Programming directly from the HW LINK app.
• Effective Bluetooth range of approximately 5 meters.
• Change settings without an additional programmer.
• View recorded data.
• Firmware updates via the app.
• Compatible with the LCD Program Box Pro.
• Compatible with the OTA Program Module.

📊 Data Logging

The MAX10 G2S features a built-in data logging system capable of recording data from the last 10 minutes of operation. The information can then be viewed graphically in the HW LINK app to analyze vehicle performance and optimize settings.

🚀 Turbo Timing

• Adjustable turbo timing up to 20°.
• May increase maximum RPM by approximately 25% with a compatible Hobbywing motor.
• This feature is optimized specifically for Ezrun 3652/3665 SD G3 motors.

🔋 BEC adjustable 6 / 7.4 / 8.4 V

• BEC 5 A continuous switch-mode power supply.
• Set to 6 V for standard servos.
• Set to 7.4 V for compatible high-voltage (HV) servos Voltage.
• Set to 8.4 V for high-voltage (HV) servos performance.
• A 3S battery is required to use the 7.4 V or 8.4 V BEC outputs.

🔧 Motor Compatibility

• With a 2S LiPo: Brushless motor up to 6000Kv.
• With 3S LiPo: Brushless motor up to 4200 kV.
• Recommended for 3652 or 3665-sized motors.

❄️ Cooling

• Housing with integrated heat sink Nitro.
• Frameless fan.
• Air exhaust through the sides.
• Temperature-controlled fan.
• Automatically activates when the temperature threshold is reached.

🛡️ Electronic protections

• Low-voltage battery protection.
• Overheating protection.
• Protection against loss of radio signal.
• Capacitor overheating protection.
• Waterproof sensor interface.
• IP67 protection against water and dust.

🚗 Applications

• Touring / 1/10 On-Road.
• Buggy 1/10.
• Rally 1/10.
• Short Course Truck 1/10.

🧩 Contents

• 1 ESC Hobbywing Ezrun MAX10 G2S 80A.

🔧 Optional Accessories

• Hobbywing LCD Program Box Pro – Part No. HW30502002.
• Hobbywing OTA Bluetooth Program Module – Part No. HW30850400.

ℹ️ Important Information

• A 3S LiPo battery is required to achieve a voltage BEC of 7.4 V or 8.4 V.
• Turbo Timing and motor protection Nitro require a compatible motor Hobbywing, such as the Ezrun 3652/3665 SD G3.
• The range Bluetooth is intentionally limited to approximately 5 meters.