⚡ The Hobbywing Ezrun MAX10 G2S 80A Combo combines the ESC next-generation MAX10 G2S with a perfectly matched Ezrun 3652SD G3 Sensored motor. Available in 3300kV, 4100kV, or 5400kV, this combo is a complete solution for 1/10 On-Road vehicles, Buggy, Rally, and Short Course lightweight vehicles, featuring built-in Bluetooth, Turbo Timing, data logging, and IP67 protection.
🆕 Key features of the combo
- ESC Ezrun MAX10 G2S 80A.
- Ezrun 3652SD G3 Sensored motor.
- Available in 3300kV, 4100kV, or 5400kV.
- Bluetooth built directly into the switch.
- Programming via the HW LINK app.
- Internal recording of the last 10 minutes.
- Turbo Timing up to 20°.
- Up to approximately 25% additional motor speed with the included motor.
- Active Nitro motor protection with the compatible Hobbywing motor.
- Adjustable BEC 6 V / 7.4 V / 8.4 V.
- ESC and motor are protected against water and dust according to the IP67 standard.
⚙️ ESC Ezrun MAX10 G2S 80A
- Type: ESC Brushless 1/10.
- Compatible with both sensored and sensorless motors.
- Continuous current: 80 A.
- Peak current: 520 A.
- Power supply: 2S to 3S LiPo.
- BEC: 5 A continuous.
- Adjustable voltage BEC: 6 V / 7.4 V / 8.4 V.
- Battery connector: XT60.
- Adjustable turbo timing up to 20°.
- Temperature-controlled frameless fan.
- Waterproof sensor interface.
- Protection: IP67.
- Dimensions: 53 x 39.5 x 37.2 mm.
- Weight: 125 g.
📱 Bluetooth and programming
- Bluetooth built into the switch.
- Programming via the HW LINK app.
- Bluetooth range of approximately 5 meters.
- View recorded data.
- Firmware updates via the app.
- Compatible with the LCD Program Box Pro.
- Compatible with the OTA Program Module.
📊 Data Logging
The MAX10 G2S records data from the last 10 minutes of operation in its internal memory. This data can then be viewed graphically in the HW LINK app to analyze vehicle performance and fine-tune settings.
🚀 Turbo Timing
- Adjustable turbo timing up to 20°.
- Up to approximately 25% additional maximum RPM.
- Fully compatible with the included Ezrun 3652SD G3 motor.
- Active motor overheating protection when used with the compatible Hobbywing Sensored motor.
🔋 Adjustable BEC
- 6 V / 7.4 V / 8.4 V.
- Continuous current: 5 A.
- A 3S LiPo battery is required to use the BEC 7.4 V or 8.4 V outputs.
⚡ Ezrun 3652SD G3 5400kV motor
- Type: Brushless Sensored.
- KV: 5400 kV.
- Power supply: 2S LiPo.
- No-load current: ≤ 6.8 A.
- Number of poles: 4.
- Length: 53 mm.
- Diameter: 37 mm.
- Shaft diameter: 3.175 mm.
- Weight: 227 g.
- Protection rating: IP67.
⚡ Ezrun 3652SD G3 4100kV Motor
- Type: Brushless Sensored.
- KV: 4100 kV.
- Power supply: 2S to 3S LiPo.
- No-load current: ≤ 5.0 A.
- Number of poles: 4.
- Length: 53 mm.
- Diameter: 37 mm.
- Shaft diameter: 3.175 mm.
- Weight: 228 g.
- Protection rating: IP67.
⚡ Ezrun 3652SD G3 3300kV motor
- Type: Brushless Sensored.
- KV: 3300 kV.
- Power supply: 2S to 3S LiPo.
- No-load current: ≤ 3.9 A.
- Number of poles: 4.
- Length: 53 mm.
- Diameter: 37 mm.
- Shaft diameter: 3.175 mm.
- Weight: 228 g.
- Protection rating: IP67.
🎯 Which version should you choose?
- 5400 kV: for maximum speed and acceleration in 2S.
- 4100 kV: an excellent balance between speed and versatility, compatible with 2S or 3S.
- 3300kV: for more torque, smoother performance, and easier handling in 2S or 3S.
🛡️ Protections
- Low-voltage protection.
- Overheating protection.
- Radio signal loss protection.
- Capacitor overheating protection.
- Motor protection Nitro with compatible Hobbywing motor.
- ESC and motor protected to IP67 standard.
🚗 Applications
- Touring / 1/10 On-Road.
- Buggy 1/10.
- Rally 1/10.
- Short Course Truck Lightweight 1/10.
🧩 Contents
- 1 ESC Hobbywing Ezrun MAX10 G2S 80A.
- 1 Hobbywing Ezrun 3652SD G3 Sensored motor in 3300kV, 4100kV, or 5400kV, depending on the version selected.
🔧 Optional accessories
- Hobbywing LCD Program Box Pro – part no. HW30502002.
- Hobbywing OTA Bluetooth Program Module – part no. HW30850400.
ℹ️ Important Information
- A 3S LiPo battery is required to use the BEC at 7.4 V or 8.4 V.
- The Bluetooth has a range limited to approximately 5 meters.
- The 5400kV version is intended for 2S use only.
- The 3300 kV and 4100 kV versions are compatible with 2S and 3S batteries.