Elceram ESC Oxide 200A Off-Road 1/8 G1 ELC011

⚡ The ELCERAM OXIDE 1/8 G1 is a high-end electronic ESC Brushless specifically developed for 1/8-scale off-road RC racing. Designed for Brushless sensor-equipped motors up to 2300Kv, it delivers a continuous current of 200A and up to 1500A peak current, with a power supply compatible with 2S to 4S LiPo batteries. It stands out for its aluminum oxide ceramic cooling system, which enables efficient heat dissipation. Its built-in TFT-LCD color screen provides direct access to settings and operating data, without requiring an external programming box. Designed for demanding drivers, the OXIDE 1/8 G1 incorporates advanced features such as Boost and Turbo Timing, current and battery discharge monitoring, motor diagnostics, and lap data logging. Its electronics feature intelligent protection algorithms, reverse polarity protection, and a water- and dust-resistant design. With its BEC adjustable from 6 to 8.4V, its compact size, and its optimized center of gravity, it is an ideal solution for buggies, truggies, and Monster 1/8 RC trucks.

⚙️ Technical Specifications

• Model: 1/8 G1 Competition Offroad
• Type: ESC electronic Brushless (ESC)
• Use: 1/8 off-road RC racing
• Compatible Motors: Brushless Sensored (with sensors)
• Compatible Motors: Up to 2300Kv
• Continuous current: 200A
• Peak current: 1500A
• Power source: 2S to 4S LiPo
• Adjustable BEC: 6.0 to 8.4V
• Continuous current BEC: 6A
• Peak current BEC: 15A
• Display: Built-in matte color TFT-LCD
• Display resolution: 160 × 80 pixels
• Programming: Directly on the ESC using 3 buttons
• Motor settings: Acceleration, braking, Boost Timing, Turbo Timing, Hall angle, and other parameters
• Zero-Timing (Blinky) mode: Supported
• Monitoring: Battery voltage, current, discharge, ESC and motor temperatures
• Data logging: Yes
• Motor and electronics diagnostics: Yes
• Reverse polarity protection: Yes
• Smart Protections: Motor faults and mechanical issues
• Cooling: Aluminum oxide ceramic heat sink
• Waterproofing: Yes, water- and dust-resistant design
• Weight distribution: Approximately 70% in the lower part of the ESC
• Mounting: Double-sided adhesive tape or 2 M2.5 screws
• Top Cover: Replaceable and rotatable 180°
• External capacitors: Required, included
• Dimensions: 50 × 40 × 28 mm
• Weight: 112 g without cables
• Power cable: AWG11, length 200 mm
• Cable length BEC: 180 mm
• Cable marking BEC: Gray stripe indicating the negative terminal
• Applications: Buggy, Truggy and Monster Truck RC 1/8

❄️ Advanced aluminum oxide ceramic cooling

The ELCERAM OXIDE 1/8 G1 features cooling technology built around an Nitro aluminum oxide ceramic heat sink.

This design promotes heat dissipation and improves the electronics’ resistance to the thermal stresses encountered during competition.

• Aluminum oxide ceramic heat sink specially developed for the OXIDE.
• Direct cooling of the MOSFET transistors, without an additional resistive layer Nitro.
• Thick layers of silver and copper are used to reduce internal resistance.
• Design optimized for high temperatures and high loads.
• Technology derived from ELCERAM’s experience in power electronics systems.

This architecture minimizes thermal losses and promotes stable operation during competition runs.

📱 Built-in TFT-LCD screen: programming without an external control box

The ELCERAM OXIDE 1/8 G1 features a 160 × 80-pixel matte TFT-LCD color display, directly integrated into the ESC.

Through this interface, drivers can access settings and operating information without using a programming card or mobile app.

• Built-in color display.
• 3 control buttons for navigating menus.
• Programming directly on the ESC.
• No external unit required.
• View data before, during, and after runs.
• Quickly change settings.
• Simplified calibration of the radio control.

This solution streamlines pit stops and saves time when making adjustments between sessions.

🏁 Advanced settings for off-road racing

The OXIDE 1/8 G1 offers numerous programming options to adapt the motor’s performance to On-road conditions.

Among the available settings:

• Acceleration to customize the motor’s response.
• Braking tailored to the driver’s preferences.
• Boost Timing to adjust the electronic ignition timing.
• Turbo Timing to modify high-RPM behavior.
• Hall angle to fine-tune engine operation.
• RC transmitter calibration.
• Zero-Timing (Blinky) mode for classes requiring zero electronic advance.

These settings allow you to tailor the car’s response to the level of traction, the track layout, and the driver’s preferences.

📊 Real-time monitoring and data logging

The ELCERAM OXIDE 1/8 G1 features an advanced electronic monitoring system that analyzes the motor’s performance.

The ESC allows you to view:

• Battery voltage.
• Current consumption.
• Information regarding battery discharge.
• The temperature of the ESC.
• Engine temperature.
• Engine diagnostic information.
• Temperature curves.
• Histograms and driving data.

This information allows drivers to analyze their engine's performance and adjust settings based on the conditions they encounter.

🔌 BEC adjustable from 6 to 8.4V

The ELCERAM OXIDE 1/8 G1 features a powerful, adjustable BEC, allowing you to adjust the power supply to the receiver and steering servo.

• Adjustable BEC voltage: 6.0 to 8.4V.
• Continuous current BEC: 6A.
• Peak current BEC: 15A.
• Compatible with HV servos that support the selected voltage.

This setting allows you to use a power supply suited to modern electronic equipment used in RC competition.

Important: Check that the receiver and servo are compatible with the selected voltage BEC before use.

🛠️ Compact design and optimized center of gravity

Despite its many features, the ELCERAM OXIDE 1/8 G1 retains a compact design, suitable for 1/8-scale off-road RC car chassis.

Its design concentrates approximately 70% of its weight in the lower section, helping to lower the vehicle’s center of gravity.

• Compact dimensions: 50 × 40 × 28 mm.
• Weight: 112 g without cables.
• Optimized weight distribution.
• Mounts with double-sided tape.
• Can be mounted with 2 M2.5 screws.
• Replaceable top cover in case of damage.
• 180° rotatable cover for easy installation.

This design makes it easy to integrate the ESC into racing chassis.

🧩 Contents

• 1 ESC ELCERAM OXIDE 1/8 G1 Competition
• External capacitors required for operation
• Double-sided tape for mounting

Details regarding any other accessories that may be included are not specified in the provided information.

🔄 Compatibility

The ELCERAM OXIDE 1/8 G1 is designed for off-road radio-controlled vehicles equipped with a Brushless sensor-equipped motor.

• Buggy 1/8 RC.
• Truggy RC 1/8.
• Monster Truck 1/8 RC.
• Sensored motors Brushless up to 2300Kv.
• 2S, 3S, and 4S LiPo batteries.
• Servos and receivers compatible with a BEC of 6 to 8.4V.
• Zero-Timing (Blinky) mode, subject to applicable race rules.

Important: The supplied external capacitors must be installed according to the manufacturer’s instructions.

🎯 Who is it for?

The ELCERAM OXIDE 1/8 G1 Competition is designed for 1/8 off-road RC competition drivers looking for a high-performance, compact ESC with advanced programming features.

With its 200A continuous current rating, aluminum oxide ceramic cooling, built-in TFT-LCD screen, and Boost and Turbo Timing settings, it allows for precise tuning of the motor’s performance.

Its diagnostic, monitoring, and data-logging features will also appeal to drivers who want to analyze their electronics and optimize their settings throughout the race.