Elceram ESC Oxide 160A 1/10 G2 G1 ELC021

⚡ The ELCERAM OXIDE 1/10 G2 is a second-generation ESC electronic Brushless specifically designed for 1/10-scale RC racing. Compatible with Brushless sensor-equipped motors starting at 6T and 2S LiPo batteries, it delivers a continuous current of 160A and up to 1500A peak current. It features an aluminum oxide ceramic cooling system, designed to optimize heat dissipation Nitro, as well as a built-in TFT-LCD color screen, allowing you to program the ESC directly without a programming board or mobile app. More compact than the first generation, it is compatible with On-road cars, buggies, and drift vehicles. The ELCERAM OXIDE 1/10 G2 incorporates numerous advanced features for competition drivers, including Boost and Turbo Timing settings, real-time monitoring of current and battery discharge, motor diagnostics, and lap data logging. Its electronics also feature reverse polarity protection and intelligent algorithms designed to protect the ESC. With its BEC adjustable from 6 to 7.4V, a weight of only 50 g, and an optimized center of gravity, it is a solution well-suited for the Stock, Open Stock, Modified, and Drift classes.

⚙️ Technical Specifications

• Type: ESC electronic Brushless (ESC)
• Generation: 2
• Scale: 1/10
• Usage: On-road, off-road, and drift
• Categories: Stock, Open Stock, Modified, and Drift
• Compatible motor: Brushless Sensored (with sensors)
• Compatible motors: 6T and up
• Continuous current: 160A
• Peak current: 1500A
• Power supply: 2S LiPo
• Adjustable BEC: 6.0 to 7.4V
• Continuous current BEC: 6A
• Peak current: 12A
• Display: Built-in matte color TFT-LCD
• Resolution: 160 × 80 pixels
• Programming: Directly on the ESC using 3 buttons
• Available settings: Acceleration, braking, Boost timing, turbo timing, Hall angle, and other parameters
• Zero-Timing (Blinky) mode: Supported
• Monitoring: Battery voltage, current, discharge, ESC and motor temperatures
• Data logging: Yes, with data retention after power-off
• Electronic diagnostics: Yes
• Programmable maintenance reminder: Yes
• Reverse polarity protection: Yes
• Smart protection: Motor faults and mechanical issues
• Cooling: Aluminum oxide ceramic heat sink and aluminum fins
• Fan connection: Yes, for smart fan
• Waterproof: No
• Weight distribution: Approximately 70% in the lower part of the ESC
• Mounting: Double-sided adhesive tape
• Top cover: Replaceable
• External capacitors: Required, included
• Dimensions: 34 × 36.5 × 20 mm
• Weight: 50 g without cables
• Cable length BEC: 180 mm
• Cable marking BEC: Gray stripe indicating the negative terminal

❄️ Advanced aluminum oxide ceramic cooling

The ELCERAM OXIDE 1/10 G2 features cooling technology built around an aluminum oxide ceramic heat sink Nitro.

This design promotes the dissipation of heat generated by the electronic components and allows the system to better withstand the thermal stresses encountered during competition.

• Aluminum oxide ceramic heat sink specially developed for the OXIDE.
• Direct cooling of the MOSFET transistors, without an additional resistive layer Nitro.
• Thick layers of silver and copper are used to reduce internal resistance.
• Additional aluminum cooling fins.
• Smart fan connector, allowing for additional cooling as needed.
• Design optimized for high temperatures and heavy loads.

This technology is designed to limit overheating of the ESC while maintaining stable electronic performance during competition runs.

📱 Built-in TFT-LCD screen: programming without an external box

One of the key features of the ELCERAM OXIDE 1/10 G2 is its 160 × 80-pixel matte TFT-LCD color display, built directly into the ESC.

Unlike ESCs that require a programming board or a mobile app, the OXIDE G2 provides direct access to settings and operating information.

• Built-in color display.
• 3 control buttons for navigating the menus.
• Programming directly on the ESC.
• No external programming unit required.
• View data before and after runs.
• Quickly change settings.
• Simplified calibration of the radio control.

This interface allows drivers to quickly make adjustments in the pits without needing a bunch of extra accessories.

🏁 Advanced settings for RC racing

The ELCERAM OXIDE 1/10 G2 offers numerous programming options to adapt the motor’s performance to different competition categories.

Among the available settings:

• Acceleration to customize the motor’s response.
• Braking according to the driver’s preferences.
• Boost Timing to adjust the electronic ignition advance.
• Turbo Timing to modify the engine's behavior at high RPM.
• Hall angle to fine-tune engine operation.
• RC transmitter calibration.
• Zero-Timing (Blinky) mode for classes requiring zero electronic advance.

These settings allow you to tailor the car’s response to the level of traction, the track layout, and the driver’s preferences.

🔌 BEC adjustable from 6 to 7.4V

The ELCERAM OXIDE 1/10 G2 features an adjustable BEC, allowing you to adjust the power supply to the receiver and steering servo.

• Adjustable BEC voltage: 6.0 to 7.4V.
• Continuous BEC current: 6A.
• Peak current BEC: 12A.
• Compatible with HV servos that support the selected voltage.

This configuration provides a power supply suitable for modern electronic equipment used in RC competition.

Important: Check that the receiver and servo are compatible with the selected voltage BEC before use.

🛠️ Compact design and optimized center of gravity

The ELCERAM OXIDE 1/10 G2 features an even more compact design than the first generation.

Measuring just 34 × 36.5 × 20 mm and weighing 50 g without cables, it’s easy to install in 1/10-scale competition chassis.

Its design concentrates approximately 70% of its weight in the lower section, helping to lower the vehicle’s center of gravity.

• Compact dimensions: 34 × 36.5 × 20 mm.
• Lightweight: 50 g without cables.
• More compact than the previous generation.
• Optimized weight distribution.
• Mounts with double-sided tape.
• Top cover with display and buttons can be replaced if damaged.

This design makes it easy to integrate the ESC into On-road cars, buggies, and drift vehicles.

🧩 Contents

• 1 ESC ELCERAM OXIDE 1/10 G2
• External capacitors required for operation
• Double-sided tape for mounting

Details regarding any other accessories that may be included are not specified in the provided information.

🔄 Compatibility

The ELCERAM OXIDE 1/10 G2 is designed for radio-controlled vehicles equipped with a Brushless sensor-equipped motor.

• 1/10 RC cars from On-road (On-Road).
• Buggy 1/10 off-road RC cars.
• RC cars from drift.
• Categories: Stock, Open Stock, and Modified.
• Sensored Brushless motors starting at 6T.
• 2S LiPo batteries.
• Servos and receivers compatible with a BEC rated from 6 to 7.4V.
• Zero-Timing (Blinky) mode, subject to applicable race rules.

Important: This ESC is not waterproof. The external capacitors provided must be installed according to the manufacturer’s instructions.

🎯 Who is it for?

The ELCERAM OXIDE 1/10 G2 is designed for 1/10 RC competition drivers looking for a high-performance, compact ESC with advanced programming features.

With its 160A continuous current rating, aluminum oxide ceramic cooling, built-in TFT-LCD screen, and Boost and Turbo Timing settings, it is a particularly attractive solution for the Stock, Open Stock, Modified, and Drift classes.

Its diagnostic, monitoring, and data-logging features will also appeal to drivers who want to precisely analyze the performance of their electronics after each race.