⚡ The ELCERAM NITRIDE 1/8 G1 is a ESC electronic Brushless specifically developed for 1/8-scale RC racing, both on On-road and off-road. Designed for Brushless sensor-equipped motors up to 2800Kv, it delivers a continuous current of 220A and up to 1500A peak current, with a power supply compatible with 2S to 4S LiPo batteries. Its unique feature is its aluminum nitride ceramic cooling system, developed by ELCERAM to optimize heat dissipation Nitro. It also features a built-in TFT-LCD color screen, allowing you to program the ESC directly and view operating data without an external control box. Designed for demanding drivers, the NITRIDE 1/8 G1 offers numerous features dedicated to competition: Boost and Turbo Timing adjustments, battery current monitoring, motor diagnostics, lap data logging, and intelligent electronic protections. Its built-in display allows you to quickly adjust settings between heats, while recorded data remains available even after the ESC is turned off. With its BEC adjustable from 6 to 8.4V, its included 25 mm fan, and its compatibility with Zero-Timing (Blinky) mode, it offers a complete solution for optimizing the performance and monitoring of your motor system.
The ELCERAM NITRIDE 1/8 G1 stands out for its cooling technology, which is built around an aluminum nitride ceramic heat sink Nitro.
This material offers excellent thermal conductivity Nitro and allows for direct cooling of the MOSFETs, without adding an intermediate layer that could increase thermal resistance Nitro.
This design is intended to limit overheating of the ESC and maintain stable operation during demanding competition use.
One of the key features of the NITRIDE 1/8 G1 is its built-in 160 × 80-pixel TFT-LCD color display.
Unlike speed controllers that require a programming board or a mobile app, the NITRIDE provides direct access to settings and operating information.
This interface allows drivers to make adjustments directly in the pits, without the need for multiple accessories.
The NITRIDE 1/8 G1 features a BEC adjustable from 6.0 to 8.4V, allowing you to adjust the power supply to the receiver and steering servo.
This configuration allows you to use HV-compatible servos, provided that the entire receiver electronics system supports the selected voltage.
The ELCERAM NITRIDE 1/8 G1 was designed for easy installation and maintenance.
To optimize cooling, ELCERAM recommends an installation that promotes heat exchange with the chassis.
The ELCERAM NITRIDE 1/8 G1 is designed for competition-grade radio-controlled vehicles equipped with a Brushless sensor-equipped motor.
Important: This ESC is not waterproof. The external capacitors provided must be installed according to the manufacturer’s instructions.
The ELCERAM NITRIDE 1/8 G1 Competition is designed for 1/8 RC competition drivers looking for a high-performance, programmable ESC with advanced diagnostic features.
With its 220A continuous current, aluminum nitride ceramic cooling, built-in TFT-LCD screen, and Boost and Turbo Timing settings, it’s a particularly attractive solution for drivers looking to optimize their powertrain.
Its data monitoring and logging system will also appeal to racers who want to precisely analyze the performance of their electronics after each heat.
Overall rating: 3.6666667 / 5 from 3 reviews.
Review topics: [].
"Impossible à connecter après avoir appeler le services apres vente qui me renvoie vers une vidéo qui ne change rien de la procédure que j’ai déjà effectué pendant environ 2h30 hier je leur et ainsi esspliquer que je n’avais pas de led verte mes pas plus de réponse"
"s’est arrivé en deux jours, c’était dans un bon carton avec une bonne boîte, il manquait rien"
"Variateur peu cher qui délivre la puissance nécessaire au moteur contrairement au Sky RC Léopard qu'il remplace. En plus possibilité de régler la puissance du frein, timing etc. Au top pour le tarif"
