Elceram ESC Nitride 180A 1/10 G2 G1 ELC020

⚡ The ELCERAM NITRIDE 1/10 G2 is a second-generation ESC electronic Brushless specifically developed for 1/10-scale RC racing. Compatible with Brushless sensor-equipped motors rated at 4.5T or higher, it delivers a continuous current of 180A and up to 1,500A peak current when powered by a 2S LiPo battery. It stands out for its aluminum nitride ceramic cooling system, designed to improve heat dissipation Nitro and minimize energy loss. Its built-in TFT-LCD color screen allows you to program the ESC directly and view operating data without a programming card or mobile app. The ELCERAM NITRIDE 1/10 G2 is designed for demanding drivers seeking high performance and precise control over their motor setup. It offers numerous settings, including Boost and Turbo Timing, as well as real-time monitoring of battery current, temperatures, and any electronic faults. More compact than the first generation, it features an adjustable BEC ranging from 6 to 7.4V, a lap data logging system, and reverse polarity protection. Its design, which includes a supplied aluminum mounting plate, makes it easy to install in On-road cars and 1/10 buggies.

⚙️ Technical Specifications

• Brand: ELCERAM
• Series: NITRIDE
• Model: 1/10 G2
• Type: ESC electronic Brushless (ESC)
• Generation: 2
• Scale: 1/10
• Use: RC On-road racing and off-road
• Categories: Stock, Open Stock, Modified, and other compatible categories
• Compatible motor: Brushless Sensored (with sensors)
• Compatible Motors: 4.5T and up
• Continuous current: 180A
• Peak current: 1500A
• Power supply: 2S LiPo
• Adjustable BEC: 6.0 to 7.4V
• Continuous current BEC: 6A
• Peak current BEC: 12A
• Display: Built-in matte color TFT-LCD
• Resolution: 160 × 80 pixels
• Programming: Directly on the ESC using 3 buttons
• Available settings: Acceleration, braking, Boost Timing, Turbo Timing, Hall angle, and other parameters
• Zero-Timing (Blinky) mode: Compatible
• Monitoring: Battery voltage, current, discharge, ESC and motor temperatures
• Data logging: Yes, with data retention after power-off
• Electronic diagnostics: Yes
• Programmable maintenance reminder: Yes
• Reverse polarity protection: Yes
• Smart protection features: Motor faults and mechanical issues
• Cooling: Aluminum nitride ceramic heat sink and aluminum fins
• Fan connection: Yes, for smart fan
• Waterproof: No
• Weight distribution: Approximately 70% in the lower part of the ESC
• Mounting: Aluminum mounting plate or direct screw mounting
• Top cover: Replaceable
• External capacitors: Required, included
• Dimensions: 34 × 36.5 × 24 mm
• Weight: 59 g without cables
• Cable length BEC: 180 mm
• Cable marking BEC: Gray stripe indicating the negative terminal

❄️ Advanced aluminum nitride ceramic cooling

The ELCERAM NITRIDE 1/10 G2 features cooling technology built around an aluminum nitride ceramic heat sink Nitro.

This material offers excellent thermal conductivity Nitro and allows for direct cooling of the MOSFETs, without an intermediate layer that could increase resistance Nitro.

• Aluminum nitride ceramic heat sink specially developed for the NITRIDE.
• Direct cooling of the MOSFETs.
• Thick layers of silver and copper are used to reduce internal resistance.
• Additional aluminum fins to improve heat dissipation Nitro.
• Smart fan connector to add ventilation as needed.
• Design optimized for high temperatures and heavy loads.

This architecture is designed to limit overheating of the ESC and maintain stable operation during race heats.

Tip: For 4.5T and 5.0T motors, ELCERAM recommends using a passive heat sink or an external fan to improve cooling.

📱 Built-in TFT-LCD screen: programming without an external control box

The ELCERAM NITRIDE 1/10 G2 features a 160 × 80-pixel matte TFT-LCD color display, directly integrated into the ESC.

Through this interface, drivers can access settings and operating information without using a programming board or mobile app.

• Built-in color display.
• 3 control buttons for navigating menus.
• Programming directly on the ESC.
• No external programming unit required.
• View data before, during, and after runs.
• Quickly change settings.
• Simplified calibration of the radio control.

This solution streamlines pit stops and saves time when making adjustments between sessions.

🏁 Advanced settings for RC racing

The ELCERAM NITRIDE 1/10 G2 offers numerous programming options to adapt the motor’s performance to various On-road conditions.

Among the available settings:

• Acceleration to customize the motor’s response.
• Braking tailored to the driver’s preferences.
• Boost Timing to adjust the electronic ignition advance.
• Turbo Timing to modify the motor’s behavior at high RPM.
• Hall angle to fine-tune engine operation.
• RC transmitter calibration.
• Zero-Timing (Blinky) mode for categories requiring zero electronic advance.

These settings allow you to tailor the car’s response to the level of traction, the track layout, and the driver’s preferences.

🔌 BEC adjustable from 6 to 7.4V

The ELCERAM NITRIDE 1/10 G2 features an adjustable BEC, allowing you to adjust the power supply to the receiver and steering servo.

• Adjustable BEC voltage: 6.0 to 7.4V.
• Continuous current BEC: 6A.
• Peak current BEC: 12A.
• Compatible with HV servos that support the selected voltage.

This configuration provides a power supply suitable for modern electronic equipment used in RC racing.

Important: Check that the receiver and servo are compatible with the selected voltage BEC before use.

🛠️ Compact design and easy installation

The ELCERAM NITRIDE 1/10 G2 features a more compact design than the first generation.

With dimensions of 34 × 36.5 × 24 mm and a weight of just 59 g without cables, it integrates easily into 1/10-scale competition chassis.

Its design concentrates approximately 70% of its weight in the lower section, helping to lower the vehicle’s center of gravity.

• Compact dimensions: 34 × 36.5 × 24 mm.
• Weight: 59 g without cables.
• More compact than the previous generation.
• Optimized weight distribution.
• Aluminum mounting plate included.
• Can be mounted directly to the chassis with screws.
• Top cover with display and buttons can be replaced if damaged.

To optimize cooling, ELCERAM recommends an installation that promotes heat exchange with the chassis.

🧩 Contents

• 1 ESC ELCERAM NITRIDE 1/10 G2
• 1 aluminum mounting plate
• External capacitors required for operation

Details regarding any other accessories that may be included are not specified in the provided information.

🔄 Compatibility

The ELCERAM NITRIDE 1/10 G2 is designed for radio-controlled vehicles equipped with a Brushless sensor-equipped motor.

• 1/10 RC cars from On-road (On-Road).
• Buggy 1/10 off-road RC cars.
• Stock, Open Stock, and Modified categories.
• Brushless sensored motors starting at 4.5T.
• 2S LiPo batteries.
• Servos and receivers compatible with a BEC of 6 to 7.4V.
• Zero-Timing (Blinky) mode, subject to applicable race rules.

Important: This ESC is not waterproof. The supplied external capacitors must be installed according to the manufacturer’s instructions.

🎯 Who is it for?

The ELCERAM NITRIDE 1/10 G2 is designed for 1/10 RC competition drivers looking for a high-performance, compact ESC with advanced programming features.