🏁 The Team Corally SYNCRO-4 is a buggy 1/8 4WD RTR designed to combine performance, durability, and ease of handling. Its 3-mm 6061-T6 aluminum chassis, fully ball-bearing-mounted all-wheel drive, and three gear differentials allow it to withstand heavy use on a variety of terrains. Powered by a 2S to 4S LiPo battery, its brushless Kuron 725 2150Kv motor paired with the ESC Torox 135 allows it to reach speeds of up to 80 km/h.
Available in Orange, Green, Pink, or Red, the SYNCRO-4 comes fully assembled with a painted, decorated, and pre-cut polycarbonate body. All you need to do is add a compatible LiPo battery and its charger to hit the On-road.
- Model: SYNCRO-4
- Type: Buggy
- Scale: 1/8
- Drivetrain: 4WD with cardan shafts
- Version: RTR – Ready To Run
- No assembly required
- Motor: Brushless
- Compatible with 2S, 3S, and 4S LiPo batteries
- Claimed maximum speed: up to 80 km/h
- Usage: Off-road
- Recommended skill level: Beginner
- 3 mm rigid 6061-T6 aluminum chassis
- Central chassis reinforcement system
- Reinforced drivetrain with CVD driveshafts
- Aluminum retaining clamps and extended drive shafts
- Drivetrain fully mounted on ball bearings with rubber guards
- 3 oil-filled bevel gear differentials
- Bevel gears and steel center Spur gear
- Hardened steel drive nuts
- Lower suspension mounts made of 3 mm 6061-T6 aluminum and composite
- Independent pillow-ball-type front suspension
- Independent rear suspension with wishbones
- Oil-filled shock absorbers with springs
- SCORPION XTB tires with 40 Shore rubber
- 17 mm wheel hexes
- 17 mm notched aluminum wheel nuts
- Titanium-anodized aluminum components
- Internal gear ratio: 3.31
- Total gear ratio: 10.15
- Gear module: MOD 1.0
- Spur gear: 46 teeth
- Gear motor: 15 teeth
- Painted, decorated, and cut polycarbonate body
- Chassis side panels designed to guide the body and limit dirt ingress
- Compatible with certain Hardcase LiPo batteries up to approximately 50 mm in height, depending on their other dimensions
- Motor brushless Team Corally Kuron 725 2150Kv
- LiPo 2S to 4S compatible motor
- ESC Team Corally Torox 135 2-4S, manufactured by HW
- CR-4225 digital servo, 25 kg
- Team Corally CT-2S 2.4 GHz radio control
- 50% / 100% power selector on the radio control
- Length: 515 mm
- Height: 185 mm
- Wheelbase: 327 mm
- Front track width: 308 mm
- Rear track width: 308 mm
- Ground clearance: 50 mm
- Weight without battery: 3,400 g
- Battery compartment: 161 x 51 x 38 mm
- Specified shock absorber diameter: 19 mm
- Front shock absorber length: 106 mm
- Rear shock absorber length: 129 mm
- Rim diameter: 90 mm
- Rim width: 42 mm
- Tire diameter: 117 mm
- Tire width: 43 mm
- Orange
- Green
- Pink
- Red
- 1 Team Corally SYNCRO-4 Buggy 1/8 4WD RTR
- 1 tool kit for basic adjustments and maintenance tasks
- 1 User Manual
- 1 compatible 2S, 3S, or 4S LiPo battery (XT90)
- 1 charger compatible with the battery used
The Team Corally SYNCRO-4 is ideal for both drivers looking to experience the performance of a true buggy 1/8 brushless as for more experienced users looking for a rugged RTR to drive hard. The 50%/100% selector allows you to temporarily reduce power to make it easier to handle, while the 4S configuration then unleashes the chassis’s full potential on rough terrain, open spaces, bumps, and off-road trails.








