CDA Corally Buggy Syncro-4 Brushless 4S 1/8 RTR CDA-C-00295

Product condition: Very good condition; used with 2 batteries for a promotional video.

🏁 The Team Corally SYNCRO-4 is a buggy 1/8 4WD RTR designed to combine performance, durability, and ease of handling. Its 3-mm-thick 6061-T6 aluminum chassis, fully ball-bearing-mounted all-wheel drive, and three gear differentials allow it to withstand heavy use on a variety of terrains. Powered by a 2S to 4S LiPo battery, its brushless Kuron 725 2150Kv motor paired with the ESC Torox 135 allows it to reach speeds of up to 80 km/h.

Available in Orange, Green, Pink, or Red, the SYNCRO-4 comes fully assembled with a painted, decorated, and pre-cut polycarbonate body. All you need to do is add a compatible LiPo battery and its charger to hit the On-road.

⚙️ Technical Specifications

• Model: SYNCRO-4
• Type: Buggy
• Scale: 1/8
• Drivetrain: 4WD with cardan shafts
• Version: RTR – Ready To Run
• No assembly required
• Motor: Brushless
• Compatible with 2S, 3S, and 4S LiPo batteries
• Claimed maximum speed: up to 80 km/h
• Usage: Off-road
• Recommended skill level: Beginner
• Rigid 3 mm 6061-T6 aluminum chassis
• Central chassis reinforcement system
• Reinforced drivetrain with CVD driveshafts
• Aluminum retaining clamps and extended drive shafts
• Drivetrain fully mounted on ball bearings with rubber guards
• 3 oil-filled bevel gear differentials
• Bevel gears and steel center Spur gear
• Hardened steel drive nuts
• Lower suspension mounts made of 3 mm 6061-T6 aluminum and composite
• Independent pillow-ball-type front suspension
• Independent rear suspension with wishbones
• Oil-filled shock absorbers with springs
• SCORPION XTB tires with 40 Shore rubber
• 17 mm wheel hexs
• 17 mm aluminum wheel nuts with notches
• Titanium-anodized aluminum components
• Internal gear ratio: 3.31
• Overall gear ratio: 10.15
• Gear module: MOD 1.0
• Spur gear: 46 teeth
• Gear motor: 15 teeth
• Painted, decorated, and cut polycarbonate body
• Chassis side panels designed to guide the body and limit dirt ingress
• Compatible with certain Hardcase LiPo batteries up to approximately 50 mm in height, depending on their other dimensions

🔌 Electronics

• Motor brushless Team Corally Kuron 725 2150Kv
• LiPo 2S to 4S compatible motor
• ESC Team Corally Torox 135 2-4S, manufactured by HW
• CR-4225 digital servo, 25 kg
• Team Corally CT-2S 2.4 GHz radio control
• 50% / 100% power selector on the radio control

📏 Dimensions

• Length: 515 mm
• Height: 185 mm
• Wheelbase: 327 mm
• Front track width: 308 mm
• Rear track width: 308 mm
• Ground clearance: 50 mm
• Weight without battery: 3,400 g
• Battery compartment: 161 x 51 x 38 mm
• Specified shock absorber diameter: 19 mm
• Front shock absorber length: 106 mm
• Rear shock absorber length: 129 mm
• Rim diameter: 90 mm
• Rim width: 42 mm
• Tire diameter: 117 mm
• Tire width: 43 mm

🎨 Available colors

• Orange
• Green
• Pink
• Red

🧩 Contents

• 1 Team Corally SYNCRO-4 Buggy 1/8 4WD RTR
• 1 tool kit for basic adjustments and maintenance tasks
• 1 User Manual

❗ Required

• 1 compatible 2S, 3S, or 4S LiPo battery (XT90)
• 1 charger compatible with the battery used

🎯 Who is it for?

The Team Corally SYNCRO-4 is ideal for both drivers looking to experience the performance of a true buggy 1/8 brushless as for more experienced users looking for a rugged RTR to drive hard. The 50%/100% selector allows you to temporarily reduce power for easier handling, while the 4S configuration then unleashes the chassis’s full potential on rough terrain, open spaces, bumps, and off-road trails.