🛻 The Bittydesign T-400 brings the look of a modern off-road pick-up to 1/10-scale crawlers and scalers with a 313 mm wheelbase. Its realistic lines, generous wheel wells, and off-road-style proportions give it a commanding presence on technical terrain. Made from high-quality Lexan polycarbonate, it combines strength and lightness to withstand the rigors of off-road driving while maintaining a particularly refined Scale finish.
- Brand: Bittydesign
- Model: T-400
- Type: Pick-up Crawler body / Scale
- Scale: 1/10
- Wheelbase: 313 mm
- Design inspired by a modern pick-up off-road vehicle
- Compatible with many Rock Crawler and Scale platforms that use a 313 mm wheelbase
- Made of high-quality Lexan polycarbonate
- Designed to combine strength and lightness
- Carefully crafted lines and proportions for a Scale realistic appearance
- Generous wheel wells to allow space for the tires when crossing bridges and during sharp suspension movements
- Body comes in clear
- Allows for fully customized painting
- Exterior protective film to prevent paint splatter
- Window masks included
- Sheet of pre-cut stickers included
- 1 transparent Bittydesign T-400 body
- 1 set of window masks
- 1 sheet of pre-cut stickers
The Bittydesign T-400 is designed for enthusiasts of Crawler and Scale 1/10 scale models looking for a modern pick-up body for a chassis with a 313 mm wheelbase. Its detailed design is equally suited to building an off-road-oriented vehicle or a Scale project where realism and customization are key.
- 1/10 Rock Crawlers
- 1/10 Scalers
- Chassis with a 313 mm wheelbase
- Check your chassis’ dimensions, mounting points, and wheel clearance before assembly
- Special polycarbonate paint
- Equipment needed for cutting and drilling, depending on the mounting system used
- Chassis, wheels, tires, and accessories shown in the illustrations are not included
For painting, it is recommended that you thoroughly clean the interior of the body with warm water and dish soap to remove any traces of grease and dust. Then apply the Lexan paint in several thin coats. The outer protective film should be removed only once the paint is completely dry.
