Awesomatix A12X Pan Car 1/12

Presentation of the Awesomatix A12X Pan Car 1/12

The A12X kit comes closer to traditional 12th scale cars with independence between the side and rear spring actions, thanks to a coil spring integrated into the rear shock absorber and new side springs. The narrower, sleeker steel chassis lowers the center of gravity and improves the overall design aesthetic.

Characteristics of the Awesomatix A12X Pan Car 1/12

Suspension and Chassis Innovations

• Advanced Spring System : New rear and lateral spring system where the actions of each spring are independent, allowing precise adjustments without interference between lateral and vertical stiffness.
• Steel Chassis : Incorporates a rear bar for an extremely low center of gravity and a slimmer, more elegant silhouette.

Improved Design and Durability

• Engine Mount and Left Bulkhead : New design with "wrench" type screw, eliminating any movement in the event of an impact, making the car virtually indestructible.
• New Model Rear Shock Absorber : With integrated spring for optimal performance.

Adjustments and Mountings

• Battery and Front Suspension Plates : Updated to allow the installation of different roll center sets.
• Left and Right Rear Hubs : Enlarged for increased contact area, further stabilizing the wheels.

Tools and Fine Adjustments

• Tools Included : 6/7mm wrench, 1.5mm Allen key and gauge for rear suspension adjustments, allowing precise adjustment and fine-tuning of vehicle setup.

A12X specification

• New rear/side spring system with side spiral springs and an independent rear center spring, avoiding any interference between them. The vertical stiffness of the rear capsule can be adjusted without impacting the lateral stiffness, and vice versa.
• New battery plate - updated for the installation of different roll center assemblies and adapted to the new side spring system.
• New steel chassis integrating the rear bar. The steel material ensures a very low center of gravity and a smaller width.
• New lightweight steering posts .
• New engine mount and left bulkhead with "wrench" mounting screws that eliminate travel in the event of an impact.
• New rear shock absorber with an “integrated” spring.
• New rear bar designed to work with the new rear spring unit.
• New front suspension plate - updated to allow the installation of different roll center assemblies.
• New left and right rear axle hubs with increased contact patch for more stable wheels.
• Three new tools in the kit - a 6/7mm wrench, a 1.5mm Allen key and a gauge for rear suspension adjustments.

Included

• A12X kit
• Installation instructions
  

Not included

• Motor and variator
• Servo (Max: 35x30x15mm)
• radio and receiver,
• Pan Car Body 1/12".
• 1/12 type wheels
• Lexan paint