Do you want power, control a vehicle with incredible stunt capabilities, while enjoying a monster truck of unparalleled reliability? Look no further than the 2022 XP 4WD 1/8 Jambo from Team Corally! Combining a short wheelbase with the power of a 6S LiPo and a 2050KV brushless motor, you will dominate the streets, bash spots or skateparks !
With an ultra-durable all-metal four-wheel drivetrain, fully independent suspension, racing chassis and aerodynamic racing design, this is the ultimate truck basher! Its short wheelbase will allow you to perform impressive figures added to endless wheelies !
The Jambo XP RTR is a powerful, unique and amazing off-road stunt car! If you like to attract crowds with a vehicle who performs the most extravagant stunts ... it's time!
The Team Corally Jambo 6 XP racing buggy is equipped with a full suite of water-resistant electronics , making it ready for use in most conditions. Not only is the variator resistant to water and mud splashes, the steering servo and receiver are also protected from the elements by special water-resistant coatings. The receiver is further protected by a sealed housing against dust, mud and moisture . Of course, the Jambo 6 XP comes with quality ball bearings with rubber seals as standard, meaning you can drive virtually anywhere and in most conditions.
Caution : Please note that no RC vehicle should be submerged in water or mud. Be careful when driving in extreme conditions! Proper maintenance should be performed after driving in mud, water, or near salt water.
Inspired by high-level competition buggies, the Jambo 6 XP uses a pan-type aluminum chassis for the most efficient and durable layout possible. The weight is distributed forward. Robust front and rear chassis reinforcements provide additional rigidity. Reinforced composite chassis side guards provide additional protection to the polycarbonate bodywork. The innovative RSP system helps keep the Jambo firmly in place when cornering and ensures consistent handling on all surfaces.
With a Team Corally Kuron 2050KV 4-pole motor mounted on a twist-resistant 2-piece aluminum sliding bracket, you can be sure to reach top speeds to perform your outdoor stunts! The engine is equipped with a hardened steel pinion , which mates to a hardened steel spur gear on the center differential. Looking to achieve remarkable top speeds with a squeeze of the trigger? Speeds of over 110 km/h are easy to achieve: just install the appropriate battery!
The innovative battery holder allows the Dementor XP to easily attach most 4S-6S Lipo batteries to protect your battery while ensuring optimal weight distribution.
As on competitive RC vehicles, the Dementor 6 is equipped with front, center and rear silicone differentials which ensure that the full power of the Kuron 2050KV motor is transmitted to the ground. Thanks to their ease of disassembly and maintenance , you can even adjust each differential individually to adjust the traction at each end of the buggy! Inside you'll find a complete set of metal gears that connect to steel center driveshafts. The front end is driven by CVD driveshafts, while the rear end is driven by sturdy metal universal joints, with the entire driveline supported by high quality 8 x 16 x 5mm ball bearings with rubber seals for maximum efficiency and durability.
The center differential used on the Jambo 6 XP features an aluminum alloy housing and steel spur gear for unmatched performance and reliability. The metal housing allows for optimal internal gear alignment improving heat dissipation and eliminating fluid loss, while the steel spur gear ensures maximum power and resistance to damage from dirt or debris.
The Jambo features upgraded composite front and rear skid plates to protect the chassis and critical suspension components, especially during big jumps. The rear wing support features additional reinforcements to maintain wing alignment during the toughest jumps and occasional somersaults. The wheelie bar helps keep the Jambo stable when the front tires want to reach for the sky during impressive wheelies.
The rubber tires are designed specifically for the Jambo, with foam inner coverings, and bonded to super sturdy rims that are attached to 17mm hex drive hubs. The innovative multi-surface tread design, combined with the optimized sidewall design, minimizes ballooning and provides maximum grip .
The Jambo is fully controlled by the ergonomic gun-style radio transmitter, which features the latest 2.4GHz technology for interference-free control from a distance of 300m . The steering wheel design makes driving intuitive and comfortable . The trigger allows perfect throttle control , with forward and reverse controls combined into a single command. Learning to control the Jambo is quick and easy with the S2R controller!
- Corally 185 Ampere 3-6S Waterproof Dimmer
- Corally Brushless Motor 2050Kv
- CR-7220-MG digital servo, metal gears, 20 kg torque
- Ergonomic Varioprop® S2R radio, with 2.4 GHz interference-free technology
- Maximum speed 110 km/h
- Aluminum servo return
- Transmission on ball bearings
- Aluminum engine mount
- Adjustable 16mm Big-Bore oil-filled shocks
- Aluminum suspension brackets
- Large adjustable battery tray
- Front and Rear Aluminum Shock Mounts
- Adjustable fin mount
- Wheelie Bar
- Durable chassis reinforcements
- Fully mounted on bearings
- Reinforced composite tie rods
- Skid Plate Front and Rear
- Team Corally RSP anti-roll bar system, front + rear
- Aluminum chassis plate
- Length: 565mm
- Width: 455mm
- Wheelbase: 327mm
- Weight: 4.8kg
- Monster Truck Jambo XP 6S
- 2.4ghz radio
- Manual
- Loop XT90 to use a 4S or 6S battery
- x2 3S Lipo Battery (XT90)
- Lipo battery charger
- Alkaline batteries 1.5V AA (x 4)
