{"product_id":"mxlr-renforts-de-carrosserie-avant-3d-a800r-rr-max-09-028","title":"MXLR 3D Front Body Reinforcements A800R\/RR MAX-09-028","description":"\u003cp\u003e🏁 \u003cstrong\u003eImprove aerodynamic stability and protect your bodywork with the MXLR front mount for the Awesomatix A800R\/RR!\u003c\/strong\u003e With the use of increasingly lighter body panels and rising speeds in Touring racing, high-speed deformation can affect vehicle performance. This bracket helps \u003cstrong\u003emaintain the shape of the hood and reduces the risk of tearing around the front wheel wells\u003c\/strong\u003e. Made of \u003cstrong\u003ePA12 nylon via 3D printing\u003c\/strong\u003e, it offers excellent resistance to mechanical stress while being specifically designed to \u003cstrong\u003epreserve the chassis’s flexibility\u003c\/strong\u003e.\u003c\/p\u003e \u003ch3\u003e⚙️ Technical\u003cstrong\u003e\u003c\/strong\u003e Specifications \u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eType:\u003c\/strong\u003e Front body bracket\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Awesomatix A800R \/ A800RR\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eMaterial:\u003c\/strong\u003e PA12 nylon\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eManufacturing:\u003c\/strong\u003e 3D printing\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFinish:\u003c\/strong\u003e New version with laser engraving\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePosition:\u003c\/strong\u003e Front of the chassis, at the cell level\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eMounting:\u003c\/strong\u003e On the mounting points of the front bumper plate\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eReduces body deformation at high speeds\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eReduces the risk of tearing in the front wheel wells\u003c\/li\u003e \u003cli\u003eHelps maintain the hood’s aerodynamic shape\u003c\/li\u003e \u003cli\u003eHelps \u003cstrong\u003emaintain downforce\u003c\/strong\u003e \u003c\/li\u003e \u003cli\u003eMaterial resistant to tensile stress, abrasion, and mechanical stress\u003c\/li\u003e \u003cli\u003eDesigned to \u003cstrong\u003eminimize the impact on chassis flex \u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eSupport point height adjustable\u003c\/strong\u003e via M4 grub screws\u003c\/li\u003e \u003cli\u003eSuitable for lightweight and ultralight bodies used in competition\u003c\/li\u003e \u003cli\u003eInstalls on existing mounting points\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e🔧 Installation Tips\u003c\/h3\u003e \u003cp\u003eThe MXLR front mount attaches to the front bumper plate of the Awesomatix A800R\/RR.\u003c\/p\u003e \u003col\u003e \u003cli\u003e \u003cstrong\u003eChoose the adjustment screw:\u003c\/strong\u003e select a 6-\u003cstrong\u003e or 8-mm-long\u003c\/strong\u003e M4 set screw, depending on the body height.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePrepare the bracket:\u003c\/strong\u003e Screw the M4 grub screw into the upper hole of the front bracket before installation. During the first installation, the screw will cut its own thread in the PA12 nylon and may require additional force.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eInstall the bracket:\u003c\/strong\u003e Remove the two screws connecting the front bumper plate to the subframes, then position the MXLR bracket.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eUse the correct screws:\u003c\/strong\u003e Replace the original \u003cstrong\u003eSB3X6\u003c\/strong\u003e screws with \u003cstrong\u003eSB3X8 or SB3X10\u003c\/strong\u003e screws, depending on the installation. These screws are not included.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eAdjust the height:\u003c\/strong\u003e Adjust the grub screw so that it \u003cstrong\u003etouches the hood, with no additional play\u003c\/strong\u003e, when the body rests normally on its supports.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e\u003cstrong\u003e💡 Tip:\u003c\/strong\u003e The mount should support the body without exerting excessive pressure on it. Proper adjustment helps minimize deformation while preserving the chassis’s natural handling characteristics.\u003c\/p\u003e \u003ch3\u003e🧩 Contents\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1 \u003cstrong\u003eMXLR front body mount for Awesomatix A800R\/RR\u003c\/strong\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e❗ You’ll need\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003e2 SB3X8 or SB3X10 mounting screws\u003c\/strong\u003e, to replace the original SB3X6 screws\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e1 M4 set screw, 6 or 8 mm\u003c\/strong\u003e, suited to the body height, if not included with the bracket\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The manufacturer specifies that the SB3X8 and SB3X10 mounting screws are not included.\u003c\/p\u003e \u003ch3\u003e🔄 Compatibility\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eAwesomatix A800R\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eAwesomatix A800RR\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e💡 Note:\u003c\/strong\u003e This part is manufactured using \u003cstrong\u003e3D printing\u003c\/strong\u003e. Slight lines or striations may be visible on its surface. This is a normal characteristic of this manufacturing process and differs from the finish of a machined or injection-molded part.\u003c\/p\u003e","brand":"mr33","offers":[{"title":"Default Title","offer_id":67705024381213,"sku":"MAX-09-028","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/2161\/5133\/files\/MAX-09-028_1__900x900_cd7e56e9-d13c-4189-b9d5-fdb52b756e23.avif?v=1791459588","url":"https:\/\/www.rcteam.com\/en\/products\/mxlr-renforts-de-carrosserie-avant-3d-a800r-rr-max-09-028","provider":"RC Team Modélisme","version":"1.0","type":"link"}